Description:

A coin or circle top textured rubber matting / flooring which is designed for added traction and appeal to modern aesthetic sensibilities.  This is a rolled rubber flooring product, which is available in seamless lengths up to 50ft.long.

Material:

SBR, Reclaimed and Recycled Rubber products

Width:

48 inch

Length:

50 ft rolls (custom lengths available)

Thickness:

3mm or 0.12 inch, & 6mm or 1/4 inch thick

Weight:

3mm 0.9 lbs per square foot, 6mm 1.8 lbs per square foot,

Hardness:

60 Shore A Nominal

Flame Spread:

Less than .50 inch/minute 

Compression:

36% @ 50 psi

Tensile Strength:

600 PSI

Coefficient of Friction:

(Dry - .085)  (Wet- .073)

Available Colors:

Black

Applications:

Alleys, Animal Transporters, Anti-Slip Surface, Pet Bedding, Bathrooms, Boats, Commercial Aisles (e.g. factories or department stores), Concrete Deterioration Prevention, Industrial Corridors, Entrance-Ways, Escalator Aprons, Factories, Garages, Greenhouses, Gyms, Medical Centers, Noise Reduction, Non-porous Surface, Public Buildings, School Facilities, Shop Floors, Sports and Leisure Centers, Store Rooms, Van Loading Floor Areas, Vapor Barrier, Walkways, Work Areas.

Excellent Traction:

The Coin-Grip offers excellent traction through its coin top rubber or hi-stud protrusions. Also the natural high coefficient of friction found in this rubber adds to the grip which this round-top runner offers.  The embossed coin pattern is designed for medium to high traffic areas where added traction is ensured with the raised studded or knob surface. 

Modern Design:

This modern sleek low-profile and non-directional look makes the Coin-Grip an excellent choice in rubber flooring. In commercial applications where surface traction from a multi-directional and easy to move flooring is required, the Coin-Grip is an excellent aesthetic choice.

Permanent installations:

For most high traffic applications, the Coin-Grip should be permanently installed with a polyurethane based adhesive (such as Chemrex® CX-941).

Temporary Installations:

For temporary type fixtures, this product can be installed with Orcon's DS-PS, a double sided sealing tape.  By securing the boundaries of the rolled product, the semi-permanent adhesive secures the roll for use and allows the flooring to be removed when needed.

Textured Base:

With a fabric base finish which ads subsurface traction, the runner's bottom surface helps secure the Coin-Grip runner mat to the floor, even when adhesive is not present.

Custom Cuts:

The Coin-Grip can be purchased in any length. Being a sheet good, it can be custom dye, laser, or waterjet cut to match any dimension or size required.  It could also be easily cut using a utility knife on location, to meet any dimensional requirement.

Cleaning:

Since this product offers moderate chemical resistance, it can be cleaned with most common household cleaners.  Strong, highly caustic cleaning solutions are not recommended.

Availability:

The Coin-Grip is always in stock, and will generally ship the same day (allow 24-48 hours for custom cut lengths).