Material:

100% SBR

Width:

36 or 48 inch

Length:

50 ft rolls (custom lengths available)

Thickness:

3mm or 0.12 inches (just under 1/8 inch)

Weight:

0.9 lbs per square foot

Hardness:

60 Shore A Nominal

Flame Spread:

Less than .50 inch/minute 

Compression:

36% @ 50 PSI

Tensile Strength:

600 PSI

Coefficient of Friction:

(Dry - .085)  (Wet- .073)

Available Colors:

Black 

Applications:

Bus & Commercial Vehicles, Catered Events, Construction Equipment, Corridors, Equipment Rental Companies, Golf Courses, Industrial Shelves, Hospital and Medical Buildings, Hotels and Motels, Industrial Aisles, Lumber Yards, Office Entryways,  Scraper Mat, Shelf Liner, Shop Matting, Skating Rinks, Slip Protection, Special Events, Storerooms, Toolbox Liner, Vibration Control, Walkways, Warehouse Flooring.

Surface Design:

Our Fine Rib Corrugated Rubber offers added traction with finer grooves and more protrusions.  The fine ribbed and ridged surface pattern is more prone to scraping action and offers added grip for applications where dirt and moisture is prevalent.  The fine ribbed corrugations are perfect for wet and slippery areas where added toehold and footing is a must. This Fine Ribbed Corrugated mat is used where floor protection and safety are of the utmost importance.

Permanent Installations:

The Fine Rib Corrugated Rubber can be installed with Chemrex® CX-941, a polyurethane based adhesive.

Temporary Installations:

For transient events and applications, this runner product can be held with Orcon's DS-PS, a double sided carpet tape.  The DS-PS  which is applied to the edges and entryways is an excellent and assertive means to hold the runner down.

Textured Sub-Surface:

The textured fabric finish on the subsurface of the rubber matting adds extra grip in temporary uses where neither permanent adhesive, nor semi-permanent double sided tape is being used.

Modular Flooring:

The Fine Rib Corrugated Rubber runner is lightweight and is used in functions which require ease of mobility of the roll. The runner is light enough that it can be packed and stored away for later use.

Custom Cuts:

This runner is offered in the 36 and 48 inch widths, and it can be purchased in any length in either dimension up to 50ft. long.

Cleaning:

The Fine Rib Corrugated Rubber?s resilient rubber surface resists common liquids and the runner can be cleaned by any common commercial or household cleaning agents.  The runner can also be hosed or mopped in outdoor applications. Cleans easily and quickly.

Availability:

The Fine Rib Corrugated Rubber is always in stock, and will generally ship the same day (allow 24-48 hours for custom cut lengths).