Description:

A diamond-plated textured rubber matting / flooring which is designed for added traction and appeal to modern aesthetic sensibilities. 

Material

SBR, Reclaimed and Recycled Rubber products

Width:

48 inch

Length:

50 ft rolls (custom lengths available)

Thickness:

3mm or 0.12 inch, & 6mm or 1/4 inch thick

Weight:

3mm 0.9 lbs per square foot, 6mm 1.8 lbs per square foot

Hardness:

60 Shore A Nominal

Flame Spread:

Less than .50 inch/minute 

Compression:

36% @ 50 PSI

Tensile Strength:

600 PSI

Coefficient of Friction:

(Dry - .085)  (Wet- .073)

Available Colors:

Black

Applications:

Alleys, Animal Transporters, Anti-Slip Surface, Pet Bedding, Bathrooms, Boats, Commercial Aisles (e.g. factories or department stores), Concrete Deterioration Prevention, Elevator Flooring, Entrance-Ways, Escalator Aprons, Factories, Garages, Greenhouses, Gyms, Industrial Corridors, Medical Centers, Noise Reduction, Non-porous Surface, Public Buildings, School Facilities, Shop Floors, Sports and Leisure Centers, Store Rooms, Van Loading Floor Areas, Vapor Barrier, Walkways, Work Areas. 

Excellent Traction:

The Diamond-Grip offers excellent traction through its diamond-plated rubber texture.  The natural high coefficient of friction found in rubber in addition to the diamond plate surface pattern, combine to maximize surface traction. The embossed diamond plate is designed for medium to high traffic areas where added traction is ensured with this rubber surface. 

Modern Design:

This modern sleek low-profile and diamond plated rubber product is an excellent choice in rubber flooring. In commercial applications where surface traction from a multi-directional easy to move flooring is required, the Diamond-Grip is an excellent aesthetic choice.

Permanent installations:

For most high traffic applications, the Diamond-Grip should be permanently installed with a polyurethane based adhesive (such as Chemrex® CX-941).

Temporary Installations:

For temporary type fixtures, this product can be installed with Orcon's DS-PS, a double sided sealing tape.  By securing the boundaries of the rolled product, the semi-permanent adhesive secures the roll for use and allows the flooring to be removed when needed.

Textured Base:

With a fabric base finish which ads subsurface traction, the runner's bottom surface helps secure the Diamond-Grip runner mat to the floor, even when adhesive is not present.

Custom Cuts:

The Diamond-Grip can be purchased in any length up to 50ft. Being a sheet good, it can be custom die, laser, or waterjet cut to match any dimension or size required.  It could also be easily cut using a utility knife on location, to meet any dimensional requirement.

Cleaning:

Since this product offers moderate chemical resistance, it can be cleaned with most common household cleaners.  Strong, highly caustic cleaning solutions are not recommended.

Availability:

The Diamond-Grip is always in stock, and will generally ship the same day (allow 24-48 hours for custom cut lengths).